Service | Materials Purchased Using Cofactr | Materials You Send Us |
Check part number and quantity on the label against the expected materials from the PO | ✅ | Not Applicable |
Check part number and quantity on the label against the expected materials that you specified were included in the shipment | Not Applicable | Only if you pre-populate parts into the shipment record in Cofactr |
Capture date code, lot code, COO | ✅ (If included on label or packing slip from distributor) | ✅ (If included on label) |
Capture certificate of conformity | Optional if enabled on your account | Optional if enabled on your account |
Count parts with an X-Ray component counter | SMT & any other compatible parts | SMT & any other compatible parts |
Count parts with a precision counting scale | Bulk parts | Bulk parts |
Count parts manually | Any other parts that can't be counted automatically | Any other parts that can't be counted automatically |
Capture photos of both sides of package | Optional if enabled on your account | Optional if enabled on your account |
MSL reset bake parts as needed | Optional if enabled on your account | Optional if enabled on your account |
Capture photo of the parts themselves under a microscope so you can view part markings, etc | Optional if enabled on your account | Optional if enabled on your account |
LCR test | Optional for passives if enabled on your account | Optional for passives if enabled on your account |
Inspect the parts themselves to verify part markings, etc | Only when explicitly requested | Only when explicitly requested |
Anti-counterfeiting inspection (More info here) | Only for purchases from non-authorized distributors | Only when explicitly requested |
Electrically/functionally test parts other than passives | ❌ | ❌ |